30.5mm*30.5mm TEARCKEP F722 X8 Flight Controller 5V 10V BEC Output with 60A 3-6S 4in1 BLheli_S ESC Stack Support RC 7 Inch 10 Inch FPV Freestyle Racing Drone
Direct purchase from the factory 
Checkout garantit sikur
Rigal b'xejn
Politika tat-tbaħħir
Politika tar-ritornRigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.Note:
1. Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2. Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.
Descriptions:
F722 Flight controller: the fpv-freestyle flight controller has been designed for optimal control of flight, which allows you to have more control over the flight. The controller is equipped with fpv, ac adapter, and a power cable. it can be used to connect the drone to the controller.
Features:
1. The F722 is a 3-8S 36x36mm mini flight controller with a 16MB Blackbox flash memory, 5V 10V dual BEC. Designed for easy maintenance and low interference.
2. The PCB adopts high-end composite material, which has stronger overcurrent capability and good heat dissipation.
MOS adopts imported high current resistance mos, low energy consumption, long life and strong load capacity.
3. Using industrial grade LDO, high temperature resistance. High-quality capacitors, strong filtering performance.
4. Intelligent control: The controller has a built-in low-noise button, which can be controlled remotely by one button.
5. Maximum power: The OSD allows you to control your drone with maximum speed and accuracy, while providing a smoother flight.
Specification:
Model | Specification |
F722 F7 Flight Controller | MCU: STM32F722RET6 IMU: ICM-42688 OSD: AT7456E Baro: SPL06-001 Blackbox: 16MB Input voltage: 3-6S Lipo(11.4-36V) 5V-BEC: 5V/2.5A u00b10.1V 10V-BEC: 10V/2A(USER1) IO2: USER2 Receiver: ELRS(CRSF), TBS(CRSF), SBUS.IBUS.DSM2.DSMX UART: UART1/2/3/4/5/6 IIC: 12C1 Led Strip: YES Buzzer: 5V ESCsignal: Support PWM, Oneshot125, Oneshot42. Multishot Dshot150, Dshot300, Dshot600 USB: TYPE-C Current port: YES Voltage sensor: YES DFU button: YES Firmware: Betaflight 4.3.1 JHEF7DUAL.HEX Size: 36*36MM Mounting Hole: 30.5*30.5*4MM Weight: 8.8g |
BLS-60A 4in1 3-6S ESC | Aperture: 30.5 * 30.5mm (after installing the shock absorber ball, the aperture is 3mm) Firmware: BLHELI-S Input voltage: LIPO 3-6S Continuous current: 60A Maximum current: 65A (10 seconds) Processor: EF8BB21 Drive signal support: DShot150-300-600/Multishot/Oneshot/PMW Current sensor: supports Size: 41 * 39 * 5mm Weight: 15g |
Package Included:
1x F722 FC
or
1x 60A 4in1 ESC
or
1x F722 60A Stack
mso-bidi-font-family:"Times New Roman";font-size:10.5000pt;mso-font-kerning:1.0000pt;">
mso-bidi-font-family:"Times New Roman";font-size:10.5000pt;mso-font-kerning:1.0000pt;">
