3Pcs DIY Light Operated Switch Kit Light Control Switch Module Board With Photosensitive DC 5-6V
71
Direct purchase from the factory 
Checkout garantit sikur
Rigal b'xejn
Politika tat-tbaħħir
Politika tar-ritornRigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.
Description:
n
nOPS-1 light control switch has two trigger modes and two output modes:
n1). Set trigger mode by JMP1:
nLight trigger mode (1-3): When the photosensitive resistance induction to the outside light from the matt to light or light gradually increased, the relay pull.
nDark trigger mode (2-4): When the photosensitive resistance induction to the outside light from the light to the matt or light gradually weakened, the relay pull.
n2). Set output mode by JMP2:
nRelay passive output and triode-driven active output, JMP2 jumper cap set whether to let the relay work, if not use the relay passive output function, you can set the relay is not working to reduce circuit power consumption, jumper cap in 2-3 position allows the relay to work, jumper cap in 1-2 position to prohibit the relay work.
n1-2: Relay is not allowed to work
n2-3: Relay is allowed to work
n
nFeature:
n
nModel: OPS-1
nName: Light-Operated Switch DIY Kit
nFinished product size: 45*38mm
nWork voltage: 5-6V
nQuiescent current: 1.5mA
nPassive load Maximum power: 300W
nActive load Maximum current: 400mA
n
nNote:
n
nIt is assumed that users have soldering skills and troubleshooting skills to assemble this kit. Buyers are advised that due to skills of user is involved in assembly, it is not guaranteed every kit will end up being a working device. But we will make as much efforts as we can to approach that goal.
n
nInstallation: Click to open
n
nPackage includes:
n
n3 x DIY Light Operated Switch Kit
n
n
n
n
nOPS-1 light control switch has two trigger modes and two output modes:
n1). Set trigger mode by JMP1:
nLight trigger mode (1-3): When the photosensitive resistance induction to the outside light from the matt to light or light gradually increased, the relay pull.
nDark trigger mode (2-4): When the photosensitive resistance induction to the outside light from the light to the matt or light gradually weakened, the relay pull.
n2). Set output mode by JMP2:
nRelay passive output and triode-driven active output, JMP2 jumper cap set whether to let the relay work, if not use the relay passive output function, you can set the relay is not working to reduce circuit power consumption, jumper cap in 2-3 position allows the relay to work, jumper cap in 1-2 position to prohibit the relay work.
n1-2: Relay is not allowed to work
n2-3: Relay is allowed to work
n
nFeature:
n
nModel: OPS-1
nName: Light-Operated Switch DIY Kit
nFinished product size: 45*38mm
nWork voltage: 5-6V
nQuiescent current: 1.5mA
nPassive load Maximum power: 300W
nActive load Maximum current: 400mA
n
nNote:
n
nIt is assumed that users have soldering skills and troubleshooting skills to assemble this kit. Buyers are advised that due to skills of user is involved in assembly, it is not guaranteed every kit will end up being a working device. But we will make as much efforts as we can to approach that goal.
n
nInstallation: Click to open
n
nPackage includes:
n
n3 x DIY Light Operated Switch Kit
n
n
n
Electronics Ranking
n
n
n
n
n
n
