0Għoġob

DIY Automatic Irrigation Module Kit Soil Moisture Detection Automatic Watering Pumping

4.1

★★★★★

147

$15.99 /$19.51

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$2.50 /$19.51

Ixtri issa Żid mal-cart

Karta ta' kreditu jew debitu

Checkout garantit sikur

Rigal b'xejn

Rigal b'xejn ma' kull xiri

Politika tat-tbaħħir

Tbaħħir standard b'xejn fuq ordnijiet ta' aktar minn $9.9

Politika tar-ritorn

Oġġetti jistgħu jintirbu sa 40 jum mill-data tar-riċeviment. Oġġetti personalizzati ma jistgħux jintirbu. Oġġetti mixtrija b'gift card jistgħu biss jinbidlu; ma jistgħux jintirbu.

Rigal B'Xejn

Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.

Politika tat-Tbaħħir

Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.

1. Politika tar-Ritorn

Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.

2.Politika tar-Rifużjoni

Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.

ntDescription:

ntIt does not require programming or a microcontroller, so please do not provide the code.

ntIt does not provide power, you can use the charging treasure (5V DC) as the power supply, or use 4pcs AA battery box and load 4 batteries.

ntAbout each part of the test:
nt

nt1. Test the relay module: connect the relay module VCC to 5V, GND to ground, IN to GND, the relay jumps, and when IN is suspended, the relay recovers, so you can hear the relay “Kaka” sound repeatedly;

nt2. Test the soil moisture sensor module: connect the fork probe and transmitter module with two DuPont wires, the transmitter module VCC is connected to 5V, GND is grounded, just after power-on, the red power light is always on, green (blue) color indication The lamp flashes faintly once; the fork probe is directly inserted into the water, and the green (blue) light is on;

nt3. Connect the red line of the pump to 5V, the black line is grounded, the pump works, pay attention to the test for 1 second, and it is not allowed to work in the air for a long time;

nt4. Assemble it according to the schematic diagram.

ntNote:

nt1, the baby can be free of welding, but you need to peel the wire, twist the copper wire together, with a black tape to protect;

nt2. The pump cannot run in the air for a long time;

nt3, the system is connected, power on, the pump has been working, is right, because in the air, the probe can not detect the humidity, so the pump has been working, the correct installation into the pot without any problems

ntPackage included:

nt1 x relay module

nt1 x soil moisture probe + comparison module

nt1 x small water pump

nt1 x battery case

nt1 x USB power cord

nt1 x silicone hose

nt10 x DuPont line

n
n

Ixtri b'Paypal