Home Infrared PIR Keyhole Light Auto ON/OFF Detector Door Lock Light Wireless Night Lamp For Stairs Warehouse Cupboard Wardrobe
Direct purchase from the factory 
Checkout garantit sikur
Rigal b'xejn
Politika tat-tbaħħir
Politika tar-ritornRigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.Light Source: 4pcs LED
Light Color: White Light
Shell Color: White/ Silver (Optional)
Power Supply: 1pc 1.5V AA Battery (Not Included)
Sensing Range: 3m 120u00b0
Size: 81*46*30mm
Function: Light Sensor+Motion Sensor
Working Temperature: -5u2103~+38u2103
How To Use:
1. Push up the back cover of the lamp body to open it;
2. Put in one AA battery and turn ON the power switch;
3. Put back the back cover and install it to the required position.
Troubleshooting:
1. When the power is turned on, the lamp does not light up.
A. Check the polarity of the battery installation
B. When the ambient light is bright, the light is in standby mode
C. Battery power is insufficient, please replace the battery
2. When the power is turned on, the LED light flashes.
A. It needs one to two minutes to stabilize the internal circuit
B. Battery may be low, please replace the battery
Package Included:
1 x Night Light
ufeffSpecification:
Light Source: 4pcs LED
Light Color: White Light
Shell Color: White/ Silver (Optional)
Power Supply: 1pc 1.5V AA Battery (Not Included)
Sensing Range: 3m 120u00b0
Size: 81*46*30mm
Function: Light Sensor+Motion Sensor
Working Temperature: -5u2103~+38u2103
How To Use:
1. Push up the back cover of the lamp body to open it;
2. Put in one AA battery and turn ON the power switch;
3. Put back the back cover and install it to the required position.
Troubleshooting:
1. When the power is turned on, the lamp does not light up.
A. Check the polarity of the battery installation
B. When the ambient light is bright, the light is in standby mode
C. Battery power is insufficient, please replace the battery
2. When the power is turned on, the LED light flashes.
A. It needs one to two minutes to stabilize the internal circuit
B. Battery may be low, please replace the battery
Package Included:
1 x Night Light
