SJ Wireless 1.2G/1.3G 2W VTX PIT/25mW/800mW/2000mW DC7-36V FPV Transmitter MMCX for Long Range RC Drone Airplane
Direct purchase from the factory 
Checkout garantit sikur
Rigal b'xejn
Politika tat-tbaħħir
Politika tar-ritornRigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.Specification:
Product name: 1.2G/1.3G 2W VTX
Dimensions: 40x27.5x13mm
Installation hole position: 30.5x30.5mm (M3)
Frequency band: 1080MHz-1360MHz
Number of channels: 9
Frequency: 1080/1120/1160/1200/1240/1280/1320/1360/1220(MHz)
Output power: 25mW800mW/2000mW/Pit mode
Frequency stability: u00b1100KHz (Typ.)
Frequency accuracy: u00b1200KHz (Typ.)
Signal-to-noise ratio S/N (Fou00b13MHz): >70dBc
Antenna port impedance: 50 Ohms
Input voltage: DC7-36V (2-8S Battery)
Output voltage: 5V@600mA
Antenna interface: MMCX
Cable interface: sh1.25 6pin
Video format: PAL/NTSC
Working temperature: -10u2103~+60u2103
Weight: 22 grams (image transmission only)
Features:
1. Three levels of adjustable power, up to 2000mW, suitable for long-distance flights
2.9 optional channels
3. Selected high-strength aluminum alloy CNC shell to assist fan cooling
4. Wide voltage input, supports 7-36V voltage
7. With temperature control protection function to prevent high temperature burning
8.Supports 30.5x30.5mm (M3) mounting holes
Package Included:
1 set x VTX
Precautions:
1. Install the antenna before use.
2. If the image transmission overheats, the temperature control protection will be activated and the power will be automatically reduced. Please ensure good ventilation and heat dissipation when using it.
3. The 5V output is only for the camera. It is prohibited to connect the power input terminal to the 5V output port, otherwise the image transmission will be damaged.
