Upgrade 2.4GHz Wireless Development Ubertooth One bluetooth-compatible Analysis Device Supports BLE
71
Direct purchase from the factory 
Checkout garantit sikur
Rigal b'xejn
Politika tat-tbaħħir
Politika tar-ritornRigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.
Description:
The upgraded version adopts the latest firmware Uber Tooth-2020-12-R1 Uber Tooth One is an open source 2.4 GHZ wireless development platform, which is suitable for bluetooth experiments. Based on the powerful LPC175XARM CORTEX-M3 microcontroller and full-speed USB 2.0, UBERTOOTH ONE is a good way to develop and customize Class 1 comparable bluetooth devices. The difference between UBERTOOTH and other bluetooth development platforms is that it can not only send and receive 2.4GHZ signals, but also run in monitoring mode to monitor bluetooth traffic in real time. This working mode has existed in low-cost WIFI module for many years, and has been applied in research, development and security audit countless times, but until now, there is no such solution in bluetooth standard. In addition, because it is a completely open source platform (software and hardware), the schematic diagram and code can meet all your needs at any time.
Features:
1. 2.4 GHz transmission and reception.
2. The transmitting power and receiving sensitivity are comparable to those of Class 1 bluetooth devices.
3. Standard Cortex debugging connector (10-pin 50-mil JTAG)
4. In-system programming (ISP) serial connector
5. An expansion connector designed for Ubertooth communication or other future uses.
6. Six indicator lights
7. Attached with 2.4 GHz antenna
Package Include:
1x Module Board
1x 2.4GHz Antenna
The upgraded version adopts the latest firmware Uber Tooth-2020-12-R1 Uber Tooth One is an open source 2.4 GHZ wireless development platform, which is suitable for bluetooth experiments. Based on the powerful LPC175XARM CORTEX-M3 microcontroller and full-speed USB 2.0, UBERTOOTH ONE is a good way to develop and customize Class 1 comparable bluetooth devices. The difference between UBERTOOTH and other bluetooth development platforms is that it can not only send and receive 2.4GHZ signals, but also run in monitoring mode to monitor bluetooth traffic in real time. This working mode has existed in low-cost WIFI module for many years, and has been applied in research, development and security audit countless times, but until now, there is no such solution in bluetooth standard. In addition, because it is a completely open source platform (software and hardware), the schematic diagram and code can meet all your needs at any time.
Features:
1. 2.4 GHz transmission and reception.
2. The transmitting power and receiving sensitivity are comparable to those of Class 1 bluetooth devices.
3. Standard Cortex debugging connector (10-pin 50-mil JTAG)
4. In-system programming (ISP) serial connector
5. An expansion connector designed for Ubertooth communication or other future uses.
6. Six indicator lights
7. Attached with 2.4 GHz antenna
Package Include:
1x Module Board
1x 2.4GHz Antenna
Electronics Ranking
